Общее описание
Разработка новых продуктов, исправление ошибок и изменение некоторого существующего функционала.
Обзор изменений
- Изменения в настройках работы с CAN в транспортной метке
- Обновлен и исправлен функционал детектора падения
- Изменения в работе динамических зон в CAS
- Исправлена ошибка при обновлении прошивке через BLE
- Исправления в TG8V при работе с внешней и внутренней флеш
- Разработка новых продуктов TG9, TGX3, TGX4, TGE, ACM1
Детальный список нового функционала и решенных проблем
Bug
- ULUN-1963 CLOSED TG6 consumption unstable
- ULUN-1960 CLOSED TG8 flash slots do not fit in M25P16
- ULUN-1955 CLOSED TG8 to show Mavlink heartbeat state
- ULUN-1953 CLOSED TGX SPI transfer size is uint8_t
- ULUN-1948 CLOSED CoAP ACK does not reset TagQueries
- ULUN-1946 CLOSED TG8 RAM first 512 bytes not used
- ULUN-1938 CLOSED PDOA logs wrong inactive chip config
- ULUN-1929 CLOSED Check BLE fw download resume
- ULUN-1907 CLOSED TGE mt3333 driver periodic assert
Story
- ULUN-1956 CLOSED Update CAN pars decoding
- ULUN-1945 CLOSED TG9: fix IMU
- ULUN-1930 CLOSED TGX3: external flash and filesystem support
- ULUN-1923 CLOSED TG9: external flash support in rtls bootloader
- ULUN-1896 CLOSED Make sw project for new TGX4 hardware
- ULUN-1895 CLOSED Make sw project for new TGX3 hardware
- ULUN-1894 CLOSED Make sw project for new TG9 hardware
- ULUN-1887 CLOSED Test and use security lwm2m objects
- ULUN-1886 CLOSED TGX: FreeFall detector test with a dummy
- ULUN-1877 CLOSED TG8V CAS: revise dynamic zones by can data received
- ULUN-1713 CLOSED TGX3: bme280 support
- ULUN-1711 CLOSED TGX3: ism330dhcx support